Weighing FAQ
Answers to the questions we hear most about load cells, checkweighers, wiring and pallet jack scales.
How to calibrate a load cell scale
Step-by-step load cell calibration: preparation, zero calibration, span calibration with test weights, linearity check and the four-corner test.
2026-10-29 ReadCheckweigher vs weight sorter: which one does your line need?
A checkweigher accepts or rejects each item against weight limits; a weight sorter splits items into several weight grades. How to choose between them.
2026-10-29 ReadWeighing indicator wiring: 4-wire and 6-wire load cells
How to wire load cells to a weighing indicator: excitation, signal and sense lines, 4-wire versus 6-wire cables, junction boxes, shielding and grounding.
2026-10-29 ReadHow accurate is a forklift or pallet jack scale?
What decides the accuracy of a pallet jack scale: capacity and division, lifting height, floor, load position and calibration, with practical tips.
2026-10-29 ReadConnecting a weighing indicator to a PLC over RS-485 Modbus RTU
Is RS-485 Modbus RTU built in or optional? Compare BDI-2033, BDI-2033C, BDE-2007 and BDI-2001B, then check baud rate, parity, slave ID and command mode.
2026-10-29 ReadCan a checkweigher detect one missing tablet in a bottle?
Catching one missing tablet depends on tablet weight, weighing error and the spread of bottle, cap and desiccant weights. How to size it, with BCW ranges.
2026-10-29 Read