BDI-2008 Push Pull Testing Weighing Indicator & Controller
Type:BDI-2008
A/D 120 times/sec. Max. Div. 1/10,000.
Double A/D Conversion (P1/P2), may Build Two capacity testing platform.
For Push and Pull Measuring.
Positive and Negative Peak Hold.
Double A/D Conversion (P1/P2), may Build Two capacity testing platform.
For Push and Pull Measuring.
Positive and Negative Peak Hold.
Production information
Standard Features
- BDI-2008 digital weight indicator connected to 2 sets of load cell sensors with two separate capacity and calibration (SRAM will store two set of parameters).
- 1/10,000 display resolution, A/D conversion rate 120 times/Sec.
- 5 testing modes for test: Last mode, Manual Hold, Hold positive peak, Hold negative peak, Hold both positive and negative peak, and Burn-in test.
- ”Watchdog”virtually eliminates malfunctions that associated with computerized equipment or software failure.
- Full Digital Calibration makes setting ZERO and SPAN Calibration an easy task.
- Drives up to 8 parallel connecting load cells, or a scale structure of 2-sets of load cells (each set with 4 load cells).
- 8k bytes SRAM with Li-battery backup. Information will not disappear even powerfailure.
- The settings of function and weighing parameters are all stored in the EEPROM, with storage duration over 40 years.
- Important values and parameters can have storage backup.
- Users can adjust the intensity of digits filter to avoid mechanical vibration that caused by external environments to achieve high-speed and accurate measurement.
- Control Inputs: ZERO Input, START/STOP, Select P1/P2, and Print.
- Control Outputs: ZERO Band output, HI output, LO Output, FR output, RUN output, and ERROR.
- Standard Serial Output (20mA Current Loop) for remote display.
- Optional printer interface can automatically print or output data ( Date & time).
| Options | ||
| OP-01 Control I/O | ||
| OP-02 Serial output interface RS-232 or RS-422 / 485 | ||
| OP-03 Printer interface (including data, time) | ||
| OP-04 Parallel BCD output interface | ||
| OP-05 Analog output 4-20mA | ||
| OP-06 Analog ooutput 0-10V |
General
| Type | BDI-2008 |
| Power Requirements | AC 110V or AC 220V±10%, 50/60Hz, Approx. 17VA |
| Net weight | Approx. 3.2kg【7.054lb】 |
| Operation Temperature | -10℃ ~ 45℃ |
| Maximum Humidity | 85%【Non-condensing】 |
| Physical Dimensions | 240 × 290 × 104mm(D × W × H) |
Analog Input and A/D Conversion
| Type | BDI-2008 |
| Input Sensitivity | 0.3uV/D |
| ZERO Adjustment Range | 0mV~24mV |
| Max. Load Cell Input Voltage | 32mV |
| Load Cell Excitation | 10V |
| Non-Linearity | ±0.01% F.S. |
| A/D Conversion Method | ΔΣ |
| A/D Resolution | ≒1/1,000,000 |
| A/D Conversion Rate | Approx. 120 Times / Sec |
Download
Product Inquiry
Need this product for your market?
Send us Product Inquiry below or use ADD TO INQUIRY cart with your specifications, sample photos, quantity, packing request, and destination country. We will review the available options and reply with suitable product details.
| Image | Product Name |
|---|---|
|
BDI-2008 Push Pull Testing Weighing Indicator & Controller BDI-2008 |